Water not draining at the end of a cycle
Dishwasher Repair
Dishwasher not draining, not cleaning, or showing an error code? We find the cause and get your Miele G 5000, G 7000 and AutoDos dishwasher back to spotless cycles. This service is scheduled as an on-site visit across Los Angeles County and Orange County.
Reviewed by admin · Last reviewed September 4, 2026
Overview
This practical guide to Dishwasher Repair explains what Dishwasher Repair usually means, the safe checks worth trying first, and when specialist repair is the better next step.
Readers looking up Dishwasher Repair usually want a clear sequence: confirm the symptom, rule out simple causes, then decide whether Dishwasher Repair needs a technician.
Use this page as a working checklist for Dishwasher Repair before you order parts or book a visit.
Common problems we fix
Dishes coming out dirty or gritty
Leaks around the door or base
Cycle will not start or stops midway
Error code displayed on the panel
Detergent not dispensing properly
Our diagnostic process
Symptom and code review
We note any displayed error code and the exact cleaning or drainage symptom.
Filter and spray-arm check
We inspect the filter, spray arms and sump for blockages.
Drain path inspection
We check the drain hose, pump and connections for restrictions.
Component testing
We test the relevant valves, pump and sensors.
The repair process
Written estimate
We share a clear estimate for your approval.
Parts confirmation
We confirm original manufacturer parts by availability.
Repair
We complete the approved repair and check for leaks.
Test cycle
We run a cycle to confirm proper cleaning and drainage.
Technician expertise
We know how Miele dishwashers report faults and where drainage and spray issues typically originate, which speeds up an accurate diagnosis.
Your service guarantee
Completed dishwasher repairs are covered by a workmanship warranty where applicable, with terms provided with your estimate.
Safety first
Safety first
A dishwasher combines water and electricity. Avoid running a leaking unit, and disconnect power before inspecting internal components.
Available in these areas
Westside
Miele repair for Westside homes, condos, and millwork kitchens.
View service areaHollywood & Central LA
Miele repair for Central LA apartments, houses, and tower kitchens.
View service areaSan Fernando Valley
Miele repair for San Fernando Valley homes and built-in kitchens.
View service areaSan Gabriel Valley
Miele repair for San Gabriel Valley homes and remodeled kitchens.
View service areaSouth Bay
Miele repair for South Bay coastal, inland, and peninsula homes.
View service areaMalibu / Santa Monica Mountains
Miele repair for Malibu, canyon, and gated mountain communities.
View service areaSoutheast / Gateway
Miele repair for Gateway Cities homes and built-in kitchens.
View service areaNorth Orange County
Miele repair for North Orange County homes and gated tracts.
View service areaCentral & Coastal Orange County
Miele repair for coastal and central Orange County homes.
View service areaSouth Orange County
Miele repair for South Orange County coastal and hillside homes.
View service areaFrequently asked questions
It usually means the unit is not draining — often a clogged filter, blocked hose or a drain pump issue. A quick diagnosis confirms which.
Codes point to a specific detected fault, such as a water-supply or drainage problem. See our error-code library for plain-language meanings.
If it leaks or shows a fault, it is best to pause use to avoid water damage.
Yes. Dishwasher diagnosis and repair are scheduled as on-site visits for addresses in Los Angeles County and Orange County. Share your ZIP when you book so we can confirm coverage.
Tell us about your Miele — we’ll take it from there
Request a repair visit for a Miele appliance in Los Angeles County or Orange County. Share the model and symptom — or call and we will take the details.
(310) 742-0025