Skip to content
On-site Miele diagnosis in Los Angeles County and Orange County.
Independent specialists focused on Miele kitchen appliances.
Error Code

Miele Range E27 Error Code

E27 on a Miele range is generally linked to a possible temperature-sensing problem. This guide gives a plain-language overview, the symptoms you might notice, safe checks you can perform, and when it is best to call a technician — with a reminder that exact behavior varies by model.

Reviewed by Maya Chen · Last reviewed September 4, 2026

At a glance

Overview

Content status Verified

Error code E27
Appliance Range
Quick answer

E27 — commonly associated with a temperature-sensor issue on a Miele range. Meaning can vary by model; verify before relying on it.

Model compatibility

Miele reuses codes across series and model years, so E27 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

On many Miele range models, the E27 code is commonly associated with a possible temperature-sensing problem. The exact meaning can differ between appliance series and model years, so treat this as general guidance and confirm it against your specific model’s documentation before acting.

Signs

Symptoms you may notice

The range displays E27 and temperatures seem off

E27 appears intermittently during operation

The range behaves inconsistently with E27 shown

Why it happens

Possible causes

A temperature sensor reading out of range

A wiring or connection issue to the sensor

A control interpreting the reading as a fault

Before you call

Safe checks you can make

These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.

Confirm nothing is blocking internal vents or airflow

Note the actual behavior or temperatures if measurable

Perform a manufacturer-approved restart

Record the full model number before contacting a technician

Caution

Safety warning

Important safety warning

Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you ever smell gas, stop immediately, do not operate any switches, leave the area and contact your gas provider and a qualified technician. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.

Please avoid

What not to attempt

Do not open internal panels or access high-voltage components

Do not adjust, disconnect or repair any gas connection or valve

Do not bypass door locks, safety switches or interlocks

Do not keep running the appliance if there is water near electrical parts, a burning smell or sparks

Get help

When to call a technician

If E27 persists after the safe checks above, or you are unsure at any point, book a diagnosis. A technician can confirm what E27 means on your specific model and resolve the underlying cause safely.

Get started

Seeing this code on your Miele appliance?

Book an on-site visit in Los Angeles County or Orange County. We diagnose the appliance that is showing the code and give a written estimate before any repair.

Where it points

Likely related component

Often related to the temperature sensor (NTC) (varies by model).

FAQ

Frequently asked questions

References

Sources & references

Supporting manuals and references used for this error-code guide.

Miele appliance user manual — error/display messages section

Reference note
Get started

Ready to restore your Miele appliance?

Book a repair for Los Angeles County or Orange County. Diagnosis first; written estimate before any work begins.

Book a repair

Tell us about your Miele — we’ll take it from there

Request a repair visit for a Miele appliance in Los Angeles County or Orange County. Share the model and symptom — or call and we will take the details.

(310) 742-0025
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Los Angeles County and Orange County.