Skip to content
On-site Miele diagnosis in Los Angeles County and Orange County.
Independent specialists focused on Miele kitchen appliances.
Error Code

Miele Dishwasher F04 Error Code

F04 on a Miele dishwasher is generally linked to a possible motor or movement-related problem. This guide gives a plain-language overview, the symptoms you might notice, safe checks you can perform, and when it is best to call a technician — with a reminder that exact behavior varies by model.

Reviewed by Maya Chen · Last reviewed September 4, 2026

At a glance

Overview

Content status Verified

Error code F04
Appliance Dishwasher
Quick answer

F04 — commonly associated with a motor issue on a Miele dishwasher. Meaning can vary by model; verify before relying on it.

Model compatibility

Miele reuses codes across series and model years, so F04 may mean something different on another appliance or generation. Confirm this against your model’s documentation and record your full model number before acting.

Plain language

What this code means

On many Miele dishwasher models, the F04 code is commonly associated with a possible motor or movement-related problem. The exact meaning can differ between appliance series and model years, so treat this as general guidance and confirm it against your specific model’s documentation before acting.

Signs

Symptoms you may notice

The dishwasher shows F04 and movement stalls or is noisy

The drum or fan doesn’t turn as expected with F04

The dishwasher interrupts its cycle when F04 appears

Why it happens

Possible causes

An obstruction or imbalance affecting movement

A motor, belt or bearing issue (varies by model)

A control or sensor related to the motor

Before you call

Safe checks you can make

These are simple, non-hazardous checks only. If anything is unclear, stop and contact a technician.

Confirm the load is balanced and not jammed

Check for visible obstructions around the drum or impeller

Perform a manufacturer-approved restart

Record the full model number before contacting a technician

Caution

Safety warning

Important safety warning

Do not open internal panels, access high-voltage wiring, or bypass any safety device. If you see smoke, sparks, a burning smell, or water near electrical parts, switch the appliance off at the outlet if it is safe to do so and call a professional.

Please avoid

What not to attempt

Do not open internal panels or access high-voltage components

Do not bypass door locks, safety switches or interlocks

Do not keep running the appliance if there is water near electrical parts, a burning smell or sparks

Get help

When to call a technician

If F04 persists after the safe checks above, or you are unsure at any point, book a diagnosis. A technician can confirm what F04 means on your specific model and resolve the underlying cause safely.

Get started

Seeing this code on your Miele appliance?

Book an on-site visit in Los Angeles County or Orange County. We diagnose the appliance that is showing the code and give a written estimate before any repair.

Where it points

Likely related component

Often related to the drive or circulation motor (varies by model).

FAQ

Frequently asked questions

References

Sources & references

Supporting manuals and references used for this error-code guide.

Miele appliance user manual — error/display messages section

Reference note
Get started

Ready to restore your Miele appliance?

Book a repair for Los Angeles County or Orange County. Diagnosis first; written estimate before any work begins.

Book a repair

Tell us about your Miele — we’ll take it from there

Request a repair visit for a Miele appliance in Los Angeles County or Orange County. Share the model and symptom — or call and we will take the details.

(310) 742-0025
Hours Mon–Sat: 8:00 AM – 7:00 PM
Service area Serving Los Angeles County and Orange County.